Joined in 2023 
82 
63 About this deal
If after this, there is still no flow, machine must be sent to a repair centre. Why does the capsule holder leak on the side? The NESCAFÉ Dolce Gusto machine heats water, which is passed at high pressure - a maximum of 15 bars - through a capsule of high quality roast and ground or soluble products (milk, chocolate, etc...) depending on the capsule variety. All the pods I used with this machine came with suggested water level settings, making my initial tests easier.
In the case of an automatic machine, you choose in advance the amount of water that will be delivered. The machine will stop by itself automatically. How does the system work? For Melody 3 FS, Circolo FS and Genio 1st generation the whole descaling process is triggered when we press the Hot button, no need to press the Cold one, both channels are descaled. It is different for other automatic machines where both buttons need to be pressed. My capsule holder is much dirtier after Chococino and Nesquik preparation than after coffee. Why? DeLonghi claims the genio s can create beverages in under 30 seconds thanks to its 15 bar high-pressure pump, which it says perfectly extracts the maximum flavour and aroma from each coffee pod, delivering a luxurious, crema-rich coffee. As with all pod machines, the clean up afterwards is minimal; all grounds are designed to stay in the pod for a mess-free coffee every time. The machine is not supposed to be used as a water boiler. Without capsule the flow is higher, the heat transfer is lower and the temperature will probably not reach the expectation of consumers. Are there any other safety precautions I should take? I have small children and I am concerned about their safety. Coffee quality – Coffee tastes decent, but could be stronger, while milk flavour takes a little getting used to
Performance
The coffee itself is perfectly good for a pod machine: we rather enjoyed the flavour of the americanos which tasted fresh and full-bodied as any manual espresso, though the fun of these machines is all in the experimenting so you can search out your own personal favourite go-to coffee. The quality of the final beverage is not impacted and can be consumed. Before preparing the next cup, clean and dry the capsule holder, particularly the beverage outlet opening. Once I finish beverage preparation and stop the machine, there is still continuous dripping of product into the cup.
However it is possible to prepare these cold beverages with the Hot function. How to use my machine in full safety?This can prevent clogging in the water outlet and hygiene issues. How often should I descale my machine? The machine need to be repaired. Why do I sometimes get different foam levels/amount of beverage even though I always press on the same number of bars?
At the end of the preparation of the drink, the on/off button flashes red for about 5 seconds. Do not remove the capsule holder during this time! The large green bars that appear on the touch screen let you choose the amount of water you’d like to use. While the machine is operating, the bars you have highlighted will turn off one by one, conveniently indicating the progress of your drink.We put the genio s through its paces to help you decide if it’s right for you – here’s our honest verdict. If you believe that one part is missing, please call Consumer Services Center and we will help you find a suitable solution. Where can I buy accessories, consumables or spare parts for my appliance? Above the green bars, you’ll find the cup icon that will activate the extraction process. Below that, a “shower” icon will light up when descaling is due. This can then be used to activate the descaling mode.
In terms of temperatures, I found the orange level perfect for longer drinks (65-70°C) and the red level necessary for shorter drinks, such as espresso. However, the final temperature of your drink will always depend on the temperature and size of the cup. Maintenance – Automatic descale alert and easy rinsing To prolong the life of your machine, it is recommended to use the descaling kit sold on our webshop or other liquid descaling kit suitable for coffee machines. How often should I clean my machine? Select the cold channel, lift and put down the water tank several times and then fix it, flow should start. If not, the needle is probably clogged.
Cold beverages have been developed to give the best taste and the best experience for consumers when prepared with cold water. The amount of beverage depends on the size of the cup, the position of the drip tray, and sometimes the milk and coffee powders which are natural products that might show a small seasonality effect. Water or liquid is leaking outside the machine during beverage preparation. Using the espresso boost also seemed to produce better crema, as did longer extraction – water level two or three instead of the recommended one bar. The best crema formed on top of an americano: at about 0.5cm it was substantial enough for me to draw a line with the spoon without parting it. However, the presence of some small bubbles indicated it wasn’t entirely smooth. The 0.8-litre removable water tank could be a little bigger. But you’re unlikely to notice it if you’re only making a cup or two at a time. What we can advise is that consumers can make 5-6 coffees in a row, but then they need to wait for a moment (1-2 minutes should be enough) before resuming extracting. Can I change the color of the red wire of NESCAFÉ Dolce Gusto® machine?
Great Deal 
New Comment